Oxidation - induced stacking faults in cz silicon 直拉硅中氧化诱生层错研究进展
Oxidation induced stacking fault 氧化感应叠层缺陷
Concentration of stacking faults 堆垛层错密度
Calculation of electron structure and stacking fault energy of the strengthening phase ni3al 基超合金强化相的电子结构和层错能的计算
More detail on dislocations , including partials , stacking faults , and dislocation intersections are discussed 更深入了解差排,探讨包含部份差排、叠差及差排间交互作用。
The microprocesses of deformation and fracture in 18 - 8 stainless steel were observed by in - situ tension in tem . it was found that the dislocations were emitted from the grainboundary and dislocation source inside a grain and slip along their slip system respectively . partial dislocation could also be emitted from the grainboundary , and moved into the grain , and that leaving behind a stacking fault 摘要浙江人学博1 :学位论文采用透射电镜动态拉伸、原位观察icrlsnigti不锈钢形变与断裂过程,发现不锈钢变形时,晶界和晶内位错源均可产生位错,并沿各自的滑移系运动。
The width of stacking fault increased as partial dislocations move forward . in the fracture of 18 - 8 stainless steel , many dislocations were emitted from the crack tip during the early stage of crack propagation and moved forward , and then a dfz was formed between the crack tip and the pile - up dislocations . the dfz is an elastic zone 不锈钢断裂时,裂尖首先发射位错,并离开裂尖向前运动,裂尖前方留下无位错区,位错反塞积在无位错区的端部,无位错区是应变很高的异常弹性区,随着裂纹的扩展,无位错区逐渐发生晶体碎化和转动。